A calibration ends with a curve: the correction that puts the greys of your print back where they belong. When you give it a name and tap the round Save button, Calibration Flow files it in the Curves tab of the library, with the image of the target used to measure it.
You can come back three months later, on another device, and find the curve, the target and the notes you left there.
#What you see
The tab shows a grid of tiles, one per curve. Each tile carries the target preview, the curve's name, then a status line: the process if you filled it in, the date, and the sync badge explained in Cross-device sync.
Tap a tile to open its full-screen card. From top to bottom:
- a strip of previews to move from one curve to the next without going back to the grid;
- the target and the curve graph, side by side;
- the card: name, process, exposure, UV unit, printer, print settings and description. What you type saves itself; a short "Saved" confirms it.
The curve's actions sit in the round menu at the bottom right, in place of the navigation buttons: tap the circle to show them. They go away when you return to the grid.
- Refine — reloads the target at the measuring step, with its framing, so you can rework the curve.
- Share — publishes the curve and its card in the Community tab. Only appears in Pro Mode.
- Export .acv — downloads the curve in the format of Photoshop's Curves tool. In Free mode, the button shows the Pro offer; see Loading your .acv curve in Photoshop.
- Delete — erases the curve after confirmation, on this device and on the others.
#Why it matters
To track chemistry drift. You recalibrate the same paper every month: the curves line up in the grid, dated. Flipping through them in the preview strip, you see whether the maximum density is dropping or the highlights are moving.
To keep the context. A curve alone doesn't say which UV unit or which exposure time it was made with. The card keeps those answers with the curve, on all your devices.
To pass on a recipe that works. In Pro Mode, a well-documented curve is published in one tap: other printers find it in the Community tab, filtered by process.
#When you don't need it
For a throwaway test. You measure a target with no intention of printing: don't save, or delete the curve afterwards. In Free mode, each curve you keep takes one of your 3 slots.
If you work only in Photoshop. Once the curve is exported as .acv and loaded into Photoshop, you can print without opening Calibration Flow again. The library becomes your archive more than your working tool.
#Worth remembering
| Element | Behavior |
|---|---|
| Saving | A name, then the round Save button after measuring |
| What a curve holds | The curve, the target, the measurement framing and the card |
| Card | Saved automatically as you type |
| Free mode | 3 curves created by you; recipes downloaded from the community don't count |
| Pro Mode | Unlimited curves, .acv export, sharing to the community |
| Synchronization | On every device signed in to the same account |
| On another device | The target arrives as a reduced preview; the full target stays on the device that measured it |
| Deletion | After confirmation, on all your devices |
#The test
Measure a target, name the curve and tap Save. Open Library: the Curves tab shows your new tile. Tap it, pick a process in the card, then go back to the grid: the tile now shows that process next to the date. Reopen the card and tap Refine: you're back at the measuring step, with your target loaded.

